Skip to content
MaritimeTest
Log in

SETS 6000 Maintain Marine Engineering & Control Systems

SETS Engine Operational 269 questions

First 5 of 269 questions — with answers

The correct answer is marked. Unlock the rest to study the whole test, online or offline.

  1. Question 1

    What is the purpose of the expansion tank?
    What is the purpose of the expansion tank?
    • To store extra water.
    • To take up the difference of water pressure with changes of temperature.
    • To act as a spare tank in case the pressure is dropping.
    • To take up the difference of water volume with changes of temperature.

  2. Question 2

    Re-conditioning part 4 and part 7 of this valve using carborundum paste is called _____?
    Re-conditioning part 4 and part 7 of this valve using carborundum paste is called _____?
    • Burnishing.
    • Re-packing.
    • Finishing.
    • Grinding.

  3. Question 3

    If the valve wheel (5) is moving very freely, but you suspect that the valve is neither opening nor closing, what are you going to check first?
    If the valve wheel (5) is moving very freely, but you suspect that the valve is neither opening nor closing, what are yo
    • Remove the complete valve assembly for overhaul.
    • Open gear box (4) and check if the sheer pin is broken.
    • Open gear box (4) and check if the valve is greased.
    • Open the valve wheel spindle and check that it is not broken.

  4. Question 4

    Upon what is the movement of the rudder dependant, when a helm order is given?
    Upon what is the movement of the rudder dependant, when a helm order is given?
    • On the spring tension of spring "S".
    • On the adjustment of the feedback rod connection "Y".
    • On the distance the command rod "C" moves point "X".
    • On the hydraulic pressure setting of the valves "PR".

  5. Question 5

    What part of a pneumatic control system is this?
    What part of a pneumatic control system is this?
    • An integrator assembly.
    • A differentiator assembly.
    • An amplifier.
    • A nozzle/flapper assembly.

Preview — 5 of 269 questions

You are seeing the first 5 questions with answers. Unlock the remaining 264 to study the whole test — online or offline.

About this SETS test

SETS 6000 Maintain Marine Engineering & Control Systems is a SETS test for the Engine department at Operational level with 269 questions and verified answers. Common topics include: centre lathe, work piece, machine tool, automation schematic, pneumatic transmitter, rake angle, nozzle flapper, three-jaw chuck.

You can practise the free questions online — one at a time, with the correct answer — or unlock the whole test and download it to study offline, without internet.

Related SETS tests