Skip to content
MaritimeTest
Log in

SETS 6000 EO1: Use Hand and Power Tools for Fabrication and Repair

SETS Engine Operational 172 questions

First 5 of 172 questions — with answers

The correct answer is marked. Unlock the rest to study the whole test, online or offline.

  1. Question 1

    What is the fastening device shown at the left side of the drawing?
    What is the fastening device shown at the left side of the drawing?
    • A beam clamp.
    • An angle iron fastener.
    • A frame clamp.
    • A support fastener.

  2. Question 2

    What is the measuring instrument shown on the left top?
    What is the measuring instrument shown on the left top?
    • An outside calliper.
    • An outside pipe calliper.
    • A Dornier calliper.
    • A Vernier calliper.

  3. Question 3

    What is the accuracy of the measuring instrument shown on the top left?
    What is the accuracy of the measuring instrument shown on the top left?
    • 1/10th to 1/20th millimetre.
    • 1/20th to 1/25th millimetre.
    • 0,1 to 0,5 millimetre.
    • 0,1 to 0,25 millimetre.

  4. Question 4

    Suppose you need to draw a circle of 186 mm diameter on metal or on a packing sheet. How would you do this using the compass shown top centre?
    Suppose you need to draw a circle of 186 mm diameter on metal or on a packing sheet. How would you do this using the com
    • Measure 186 mm on packing, draw 2 lines through the centre.
    • Set opening of compass legs to 93 mm using a steel ruler.
    • Indicate straight line with points 0 mm, 93 mm and 186 mm on packing.
    • Project first a hexagon on packing or steel plate.

  5. Question 5

    What is the accuracy of a micrometer shown top right?
    What is the accuracy of a micrometer shown top right?
    • 0,1 to 0,2 millimetres.
    • 0,1 to 0,5 millimetres.
    • 0,01 to 0,005 millimetres.
    • 0,05 to 0,01 millimetres.

Preview — 5 of 172 questions

You are seeing the first 5 questions with answers. Unlock the remaining 167 to study the whole test — online or offline.

About this SETS test

SETS 6000 EO1: Use Hand and Power Tools for Fabrication and Repair is a SETS test for the Engine department at Operational level with 172 questions and verified answers. Common topics include: bottom left, steel plate, edge preparation, engine room, tool, top, metal, right.

You can practise the free questions online — one at a time, with the correct answer — or unlock the whole test and download it to study offline, without internet.

Related SETS tests