Skip to content
MaritimeTest
Log in

SETS 6000 EM10: Diagnose and Correct Equipment Malfunctions

SETS Engine Operational 19 questions

First 5 of 19 questions — with answers

The correct answer is marked. Unlock the rest to study the whole test, online or offline.

  1. Question 1

    What is the function of item "PC"?
    What is the function of item " PC "?
    • Pressure Controller activating 3-way valve solenoid.
    • Pressure Container admitting air to air bottle.
    • Pressure Container activating automatic pressure release valve.
    • Piston Controller activating compressor piston movement.

  2. Question 2

    What is item "U" and how does it act on item "S"?
    What is item " U " and how does it act on item " S "?
    • Item "U" is the uplifter of the air bottle's safety valve.
    • Item "U" is the upper pressure limit valve activating the solenoid.
    • Item "U" is the unloader lifting the compressor suction valve.
    • Item "U" is the activator for the safety release valve.

  3. Question 3

    You will notice in this drawing that steam traps are fitted so only condensate can return. Then why is there an atmospheric condenser fitted?
    You will notice in this drawing that steam traps are fitted so only condensate can return. Then why is there an atmosphe
    • Because the water is condensed under pressure and will re-evaporate.
    • To allow the vapour and water to be cooled under vacuum.
    • To de-airate the water under vacuum.
    • To avoid steaming up if steam traps are frequently stuck or defective.

  4. Question 4

    What will happen if the seat plate 5 is ground too much allowing valve disc 4 to open an increased amount?
    What will happen if the seat plate 5 is ground too much allowing valve disc 4 to open an increased amount?
    • The thermodynamic efficiency decreases.
    • The compression ratio decreases.
    • The maximum output pressure decreases.
    • All of these.

  5. Question 5

    What are the steps to be taken, in what order, to stabilise the governor of a diesel engine after overhaul?
    • Adjust speed P, then integrate, next differentiating, from 0.
    • Set integrating to MAX, than adjust speed P and differential D.
    • Set integrating to MAX, differentiating to MIN, adjust speed upward.
    • Integrating and differentiating MAX, set speed from 0 upwards.

Preview — 5 of 19 questions

You are seeing the first 5 questions with answers. Unlock the remaining 14 to study the whole test — online or offline.

About this SETS test

SETS 6000 EM10: Diagnose and Correct Equipment Malfunctions is a SETS test for the Engine department at Operational level with 19 questions and verified answers. Common topics include: engine, boiler, item, air, oil, cylinder, too, amount.

You can practise the free questions online — one at a time, with the correct answer — or unlock the whole test and download it to study offline, without internet.

Related SETS tests