Skip to content
MaritimeTest
Log in

Sulzer Medium Speed Diesel Engine

CBT 10 questions

First 5 of 10 questions — with answers

The correct answer is marked. Unlock the rest to study the whole test, online or offline.

  1. Question 1

    Select the correct option to accurately complete the following statement according to the information provided in this module. During slow turning of the main engine, the indicator cocks:
    • Must be fully open throughout the operation.
    • Must be kept shut throughout the operation.
    • Need only be partially opened.
    • May be either open or closed.

  2. Question 2

    Select the correct option to accurately complete the following statement according to the information provided in this module. The main engine can be started after a long period of shutdown:
    • Almost immediately.
    • Only after performing basic checks listed in this module.
    • Only after performing advanced checks and critical measurements.
    • Only with the permission of the head office ashore.

  3. Question 3

    Select the correct option to accurately complete the following statement according to the information provided in this module. The turning of the cylinder lubricators before start-up:
    • Is to ensure pre-lubrication and assess the force required to pump the cylinder lubricating oil and check its flow.
    • Is merely a part of routine.
    • Makes no difference at all.
    • Wastes unnecessary lubricating oil and must be avoided.

  4. Question 4

    Select the correct option to accurately complete the following statement according to the information provided in this module. When paralleling two main engines, the rpm of the incoming engine should be:
    • Slightly lower than the running engine.
    • Slightly higher than the running engine.
    • The same rpm as the running engine.
    • Fluctuating between higher and lower rpm than the running engine.

  5. Question 5

    Select the correct option to accurately complete the following statement according to the information provided in this module. When two of the Sulzer 12ZAV40S engines are running in parallel:
    • Each speed governor controls the fuel setting for its own engine.
    • One of the speed governors controls the fuel setting for both engines, ordering the same fuel setting for each engines.
    • One of the speed governors controls the fuel setting for both engines, ordering an increased fuel setting for the first connected engine.
    • One of the speed governors controls the fuel setting for both engines, ordering an increased fuel setting for the second connected engine.

Preview — 5 of 10 questions

You are seeing the first 5 questions with answers. Unlock the remaining 5 to study the whole test — online or offline.

About this CBT test

Sulzer Medium Speed Diesel Engine is a CBT test with 10 questions and verified answers. Common topics include: information module, accurately, main, engines, engine.

You can practise the free questions online — one at a time, with the correct answer — or unlock the whole test and download it to study offline, without internet.

Related CBT tests