Skip to content
MaritimeTest
Log in

Integrated Survey Program (ISP)

CBT 34 questions

First 5 of 34 questions — with answers

The correct answer is marked. Unlock the rest to study the whole test, online or offline.

  1. Question 1

    Coating is applied in ballast tanks for protection of steel against corrosion. Which type of coating is not considered by the class to be an efficient corrosion protection system?
    • Semi-hard coating.
    • Soft coating.
    • Hard coating.

  2. Question 2

    During inspection of the aft peak, where are cracks unlikely to be found?
    • Vibration crack at connection between floor and hull plating.
    • Indentation due to bottom slamming.
    • Fatigue cracks at the top of tanks.

  3. Question 3

    For a simply supported beam with a concentrated load at middle of the span, the maximum bending moment is higher:
    • At middle of span.
    • At the end supports.
    • At the quarter length of span.

  4. Question 4

    For efficient cathodic protection of ballast tanks which of the following does not apply?
    • Anodes are to be properly attached.
    • Anodes are to be submerged in water.
    • Anodes are to be painted.
    • Consumed anodes are to be replaced.

  5. Question 5

    How does the class notify deficiencies?
    • Memo to the owner (MO) covering the deficiency.
    • Condition of Class (CC) for owner in case of minor deficiency.
    • Memo to the surveyor.
    • Write a report only.

Preview — 5 of 34 questions

You are seeing the first 5 questions with answers. Unlock the remaining 29 to study the whole test — online or offline.

About this CBT test

Integrated Survey Program (ISP) is a CBT test with 34 questions and verified answers. Common topics include: ballast tanks, acceptance criteria, very important, hull girder, corrosion, class, inspection, cracks.

You can practise the free questions online — one at a time, with the correct answer — or unlock the whole test and download it to study offline, without internet.

Related CBT tests