Skip to content
MaritimeTest
Log in

Reefer Ship

CES Deck Support Reefer Ship 155 questions

First 5 of 155 questions — with answers

The correct answer is marked. Unlock the rest to study the whole test, online or offline.

  1. Question 1

    Code: TRQA When keeping a lookout, what would be the correct understanding of the question "What is the aspect of the other ship"?
    • The question is requesting some idea of how far away the other ship is from your own ship.
    • The question is requesting where on the horizon the other ship was sighted.
    • The question is requesting some indication of the direction the other ship is heading.
    • The question wants to know what type of ship has been sighted.

  2. Question 2

    Code: DRGO62 What is means "Set Point"?
    • Port of destination.
    • Required temperature of Chief Officer/Planner.
    • Required temperature for transportation of cargo in reefer container.

  3. Question 3

    Code: DBSU On the figure there are four (4) possible definitions of the term "BOLLARD" given. Which one is the correct one?
    Code: DBSU On the figure there are four (4) possible definitions of the term "BOLLARD" given. Which one is the correct o
    • Bollard is given by "B" on the figure.
    • Bollard is given by "C" on the figure.
    • Bollard is given by "D" on the figure.
    • Bollard is given by "A" on the figure.

  4. Question 4

    Code: JIQO The figure shows the cross section of a ship floating in water with the hull coloured in red and the seabed below the vessel shaded. On this figure there are four (4) possible definitions of the term "UNDERKEEL CLEARANCE" given. Which one is the correct one?
    Code: JIQO The figure shows the cross section of a ship floating in water with the hull coloured in red and the seabed b
    • Underkeel clearance is given by "A" on the figure.
    • Underkeel clearance is given by "B" on the figure.
    • Underkeel clearance is given by "C" on the figure.
    • Underkeel clearance is given by "D" on the figure.

  5. Question 5

    Code: UOIK61 Based on pressure measurements, how to determine that the compressor is out of order?
    • The suction pressure is less than the discharge pressure.
    • The suction pressure equal to discharge pressure.
    • The suction pressure greater than the discharge pressure.
    • Compressor failure will not affect to the system pressure.

Preview — 5 of 155 questions

You are seeing the first 5 questions with answers. Unlock the remaining 150 to study the whole test — online or offline.

About this CES test

Reefer Ship is a CES test for the Deck department at Support level with 155 questions and verified answers. Common topics include: conventional reefer, figure four, definitions term, officer watch, main reason, hard starboard, prevent fire, code.

You can practise the free questions online — one at a time, with the correct answer — or unlock the whole test and download it to study offline, without internet.

Related CES tests